PALS and MOLLE are often used as if they mean the same thing. They do not. PALS is the row of webbing loops sewn onto a vest or belt. MOLLE is the system used to attach pouches to those loops. If the loop spacing or strap width is wrong, the pouch will not sit flat.

The short answer

Most airsoft chest rigs and battle belts use 25 mm (1 inch) webbing with 25 mm horizontal spacing. A pouch with two vertical straps will usually fit, but check the strap length and the number of rows before ordering.

Three things to check

  • Webbing width: 25 mm is the common standard. A 38 mm loop is a different system.
  • Row spacing: the pouch straps need to pass through two rows, not one.
  • Strap length: thick padded pouches need longer straps; short straps may not close.

What fits our rigs

The FK-CR-006 and FK-CR-008 plate carriers use a 6 x 3 PALS front panel. Standard 25 mm PALS pouches fit. The FK-CA-027 belt uses the same webbing standard. If you are not sure, measure the distance between the centre of two rows before you buy.

Common mistakes

  • Buying a pouch with fixed plastic clips that do not match your webbing.
  • Mounting a heavy pouch on one row only.
  • Putting a wide radio pouch on a narrow side panel.

How to test before a game

Fit the pouch, load it, shake the rig gently and check that the straps are still seated. A pouch that moves when you run will move more when you crawl. If it shifts, add a strap or move it to a flatter panel.

If you need help matching a pouch to a carrier, send us the carrier model and a photo of the back of the pouch. We will check the fit before you order.